[sim clonning]
well.. !!!
[note- don't ask me
links 4 softwares in dis]
sim cloning!!
sim cloning
simcloning
I have decided not to
hide it under scraping....
so posting here!
Clone Sim cards
how to clone Sim
cards?
the information below
has been complied from my research over the last few years through my
experience and with help from others in the Gsm world.
PLEASE NOTE:
Sim card cloning is
illegal in some countries,
This guide is for
educational purposes only.
What hardware you
will need:
1. Sim card reader
2. Wafer card
programmer
3. Empty sliver pic 2
card
4. Mains unregulated
adapter
5. 9 Pin male to
female extension cable
What software will
you need :
1. Cardinal 68
2. Card master
3. You will also need
Sim emu
Lets get started
Plug your Sim Reader
in to your comport
Run cardinal and
click where it says "click here" click Settings.
Select your
com/serial Port and the Baud Rate, press Close when done
Now left click where
it says "click here" Go to smartcard from there click Sim editor.
The program will
start from the menu got to SIM then Sim Info and click the load button shown
above.
You will see the
"IMSI" Code after pressing load
Take note of the
"IMSI" and keep it safe
Now close the Sim
info window and from the menu go to Security then Find Key KI
Click start on the
Find KI window and wait...
It will take up to 4
hours to find the Ki
Click start on the
Find KI window and wait...
It will take up to 4
hours to find the Ki
Take note of the
"KI" and keep it safe
You are now finished
reading the Ki and Imsi
NEXT STEP
Loading Sim Emu !
Buy an Empty Silver
Card
In the
Unzipped/Unpacked file you will find
SEE50s.hex = Eeprom
SEF50sEN.hex = PIC
Connect the
programmer to a com port and go to the setup menu and choose the appropriate
com port, when this is done
There should be a
yellow rectangle at the bottom of the program telling you there is no card
Insert the smartcard
to the programmer, the rectangle should now change colour to green
Choose Silver card
from Card type
Push the open button
and choose SEF50sEN.hex
Push the open button
and choose SEE50s.hex
.Press the edit menu
and push Auto Program
Cutting the card
Configuring your card
!
Insert the Silver we
have trimmed in to the phone it may ask for pin
its 1111
From the menu go to
Sim Emu
From Sim Emu 5 Menu
go to Set Phone #
Select GSM #1 or any
Slot
Select Configure
.Select Edit #
Edit GSM # X to any
name
After done press OK
then go to Config. PoS.
It will ask for PIN2
its 1234
.It will ask you what
position you want that card to be Select a Position 1 to 8
It ask you to enter
the IMSI You got from Cardinal
It ask you to enter
the KI You got from Cardinal
It will ask you to
enter you PUK enter any up to 8 Digits
It will ask you to
enter you PUK enter any up to 4 Digit
Exit the settings and
go to Reset
AND THAT'S THAT
IF EVERY THINK WENT
ACCORDING TO PLAN THEN YOU WILL NOW HAVE A CLONED SIM CARD.
These post is only
for information!!
Members or owner will
be responsible for any loss!!