sim clonning

[sim clonning]

well.. !!!

[note- don't ask me links 4 softwares in dis]

sim cloning!!

sim cloning

simcloning

I have decided not to hide it under scraping....

so posting here!

Clone Sim cards

how to clone Sim cards?

the information below has been complied from my research over the last few years through my experience and with help from others in the Gsm world.

PLEASE NOTE:

Sim card cloning is illegal in some countries,

This guide is for educational purposes only.

What hardware you will need:

1. Sim card reader

2. Wafer card programmer

3. Empty sliver pic 2 card

4. Mains unregulated adapter

5. 9 Pin male to female extension cable

What software will you need :

1. Cardinal 68

2. Card master

3. You will also need Sim emu

Lets get started

Plug your Sim Reader in to your comport

Run cardinal and click where it says "click here" click Settings.

Select your com/serial Port and the Baud Rate, press Close when done

Now left click where it says "click here" Go to smartcard from there click Sim editor.

The program will start from the menu got to SIM then Sim Info and click the load button shown above.

You will see the "IMSI" Code after pressing load

Take note of the "IMSI" and keep it safe

Now close the Sim info window and from the menu go to Security then Find Key KI

Click start on the Find KI window and wait...

It will take up to 4 hours to find the Ki

Click start on the Find KI window and wait...

It will take up to 4 hours to find the Ki

Take note of the "KI" and keep it safe

You are now finished reading the Ki and Imsi

NEXT STEP

Loading Sim Emu !

Buy an Empty Silver Card

In the Unzipped/Unpacked file you will find

SEE50s.hex = Eeprom

SEF50sEN.hex = PIC

Connect the programmer to a com port and go to the setup menu and choose the appropriate com port, when this is done

There should be a yellow rectangle at the bottom of the program telling you there is no card

Insert the smartcard to the programmer, the rectangle should now change colour to green

Choose Silver card from Card type

Push the open button and choose SEF50sEN.hex

Push the open button and choose SEE50s.hex

.Press the edit menu and push Auto Program

Cutting the card

Configuring your card !

Insert the Silver we have trimmed in to the phone it may ask for pin

its 1111

From the menu go to Sim Emu

From Sim Emu 5 Menu go to Set Phone #

Select GSM #1 or any Slot

Select Configure

.Select Edit #

Edit GSM # X to any name

After done press OK then go to Config. PoS.

It will ask for PIN2 its 1234

.It will ask you what position you want that card to be Select a Position 1 to 8

It ask you to enter the IMSI You got from Cardinal

It ask you to enter the KI You got from Cardinal

It will ask you to enter you PUK enter any up to 8 Digits

It will ask you to enter you PUK enter any up to 4 Digit

Exit the settings and go to Reset

AND THAT'S THAT

IF EVERY THINK WENT ACCORDING TO PLAN THEN YOU WILL NOW HAVE A CLONED SIM CARD.

These post is only for information!!

Members or owner will be responsible for any loss!!